Kimberly-Clark Job Recruitment

Kimberly-Clark and its well-known global brands are an indispensable part of life for people in more than 150 countries. Every day, 1.3 billion people - nearly a quarter of the world's population - trust K-C brands and the solutions they provide to enhance their health, hygiene, and well-being. With brands such as Kleenex, Scott, Huggies, Pull-Ups, Kotex, and Depend, Kimberly-Clark holds No.1 or No. 2 share positions in more than 80 countries.

We are recruiting to fill the positions below:   Job Title: Shift Electrical Technician Ref Id: 804078 Location: Nigeria - Lagos Worker Type: Employee Worker Sub-Type: Regular Job Type: Full time

Job Description Safety:

• Ensure compliance to all departmental and plant safety rules and regulations.  All non-conformances should be dealt with immediately all unresolved issues must be raised with Asset Leader.  Follow the correct WI/WP and Process Instruction for all tasks performed. Carry out continual development of process optimization to ensure safety.

Productivity:

• Work with change over’s on the asset in order to minimise change over delay
• To continuously work on improvement plans to upgrade/improve the asset performance and capability.
• Ensure all documentation, including drive and PLC data is recorded properly and systematically to provide optimum reliability of the asset.
• To support production within the diaper operation by providing electrical technical support to the production teams.
• To carry out action plans as directed in order to solve problems thereby minimizing electrical delay.
• Analyse electrical delay and together with Day Electrical Technician resolve problems from electrical/electronic nature to ensure minimum delay.

Maintenance:

• Recommend spares requirements to the Electrical Engineer.
• Provide technical information to maintenance teams detailing work requests for planned and reactive maintenance
• To participate in maintenance activities on all electrical equipment and installation.
• To ensure that electrical spares are available and ready for use when required.
• To provide assistance with standardisation, recommendation of changes in maintenance policies, fault finding and problem solving.

Housekeeping:

• Maintain 5S housekeeping principles in the department at all times, including all equipment and surrounds.  Ensure all unused items are removed from the operating area and stored correctly.

Qualifications  

   

Job Title: Technical Stores Operator Job ID: 803103 Location: Lagos, Nigeria Time Type: Full time Worker Type: Employee Worker Sub-Type: Regular

Job Descriptions

• Check MB51 report to confirm correct capturing of invoices/material requests
• Review internal controls procedures when required.
• Scrutinize dispatch notes for stock and non-stock send out for repairs / replacement.  Follow up with end users for PR  /PO numbers.  Close of document once item is returned
• Report back to Engineering Manager on a monthly basis regarding out of stock issues (Complete a document for each incident and attach relevant communication and corrective action taken).  This includes the MB51 checks and issues picked up with MR/Invoices
• Do 5 daily spot checks on stock delivered – Report to Engineering Manager monthly.
• Do a regular checks on material request to confirm bin cards are updated (Use MR’s submitted with MB51) – Report to Engineering Manager monthly
• Attend weekly meetings regarding: Safety & Housekeeping / HR issues / Cycle counts / Receiving / Out of stock issues / General
• Promptly processing of customer requests to amend item descriptions, review stock levels & timeout ordering of additional materials for shutdown purposes.
• Stock transfers via Transaction SAP code from duplicated items & subsequent request to OTS Europe to delete items.
• Review customer request for re-instatement of items and subsequent communication to OTS to De-flag.
• Scrutinizing material Records for duplicate records, incorrect base units of measure, incomplete description & incorrect material types.
• Process request for re-classification of items e.g. Standard spares to reparable item and forward to Store leader for loading.
• Arrange the de-flagging of items to enable processing of corrections required by casting, followed by requesting deletion.
• Routing all material master amendments to Store Leader for capturing.
• Verifying entries on SAP to ensure accuracy.
• Daily stock records & reporting
• Maintain SAP records by updating bin allocations / part numbers / descriptions / min & max levels
• Assist team members with queries.
• Receive goods when required.

Global VISA and Relocation Specifications:

• A role in the new Mill

Job Title: Laboratory Technician Ref Id: 804080 Location: Nigeria - Lagos Worker Type: Employee Worker Sub-Type: Regular Job Type: Full time

Job Description Perform work in a safe manner.

• Participate in providing quality training to the Operations crew on product quality.
• Communicate quality systems changes, trials/waiver activity, specification updates and concerns to crew members.
• Compiling of shift quality reports and accumulating quality statistical data.
• Maintain and calibrate quality testing equipment and instruments as per schedule and report any defective instrumentation to the Quality Leader Specialist.
• Support execution of Quality protocols and Trial activity.
• Adherence to KC Safe Work Practices, Good Laboratory Practices, LEAN Manufacturing Principles and maintain Housekeeping Standards.
• Ensure QA records of retained samples are properly maintained.
• Support quality leader specialist with entrenching quality mind-set and ensuring process improvement
• Share expertise and knowledge of product quality and the consumer impact with operation's crews.
• Provide accurate, real-time audits of plant inspection and testing results to identify and correct quality deficiencies on shift.
• Review documentation and determine disposition of key raw materials.
• Provide timely, effective communication of quality system changes, updates and concerns to operation crew members.
• Assist with troubleshoot PASS related software issues.
• Provide Operations with testing, inspection and general machine support as needed to meet quality objectives.
• Complete documentation for held or rejected finished product and raw material and ensure held and rejected material are clearly labelled for traceability and inform the Quality Leader Specialist.
• Coordinate on shift re-work of held finished product according to procedures.
• Monitor and identify crew specific quality development needs and communicate this to the Quality Leader Specialist.

Qualification

• Experience in ISO 9001 standards.
• Computer Literacy.
• Good communication, statistical and analytical skills.
• Higher National Diploma or Bachelor’s Degree in Science and Lab Tech, Chemistry, Food Science, Microbiology, or related field and 1-2 years quality experience in FMCG environment as a Quality Control Inspector

         

Job Title: Waste Room Operator (Central System)-4 Ref Id: 804086 Location: Nigeria - Lagos Worker Type: Employee Worker Sub-Type: Regular Job Type: Full time

Job Description

• Ensure all bales conform to agreed standards of compression and bales are of good quality
• Manually load all other diaper waste into the Baler.
• Operate stretch wrap machine and ensure all bales are properly wrapped.
• Remove all bales to designated storage area by means of clamp truck.
• Knows and actively participate in all work and repairs which are carried out in his/her sector by the support teams
• Reports and informs team leader of the maintenance and improvement required of his sector.
• During shift changes, communicates to the incoming operator all new occurrences, repairs, process changes and materials issues.
• Informs team leader when waste bins require emptying.
• Complies with all safety rules, procedures and works instructions applicable to area of responsibility.
• Maintains a high standard of housekeeping and hygiene in the entire Central Systems area, waste canopy and waste bin area and follow 5S Housekeeping principles.
• Checks that consumables that enter his/her sector correspond with the requirements of the product being disposed.
• Ensure efficient operations of the Diaper Cull, Trim Balers and the Briquetter
• Ensure Balers are set at agreed setting and ensure basic maintenance tasks and check sheets are done.

Qualifications

• Prior high-speed production machine maintenance or operating experience, especially on Diaper machines will be advantageous.
• Forklift Driver Licence or the ability to acquire licence within 3 months
• National Diploma ND or equivalent qualification in Mechanical or Electrical Engineering
• Minimum of 3 years’ experience on high-speed production equipment, of which at least 2 years must be process experience.

Job Title: Niche Technician, Packaging Ref Id: 803949 Location: Nigeria - Lagos Worker Type: Employee Worker Sub-Type: Regular Job Type: Full time

Job Description

• Perform modular process health checks in-line with center-lining guidelines.
• To analyze breakdowns and failures, downtime, reliability of equipment, identify problem nodes, if possible, to eliminate inconsistencies.
• Compile all area issues and reasons for stops and provide a proper update at the support meeting
• Lead and actively participate in all work and repairs which are carried out in FCO section by the support teams
• Initiate and ensure proper maintenance and improvement of area equipment.
• Adjust the schedule of planned maintenance in the event of an emergency equipment failure and investigate the incident with a precautionary plan.
• Ensure equipment and area centre-line is maintained at all times
• Timely provide update on the changes and improvements made to operating teams and shift technicians
• To provide clarifications and training for operators and contractors on how to carry out work and operation of equipment safely, and to carry out repairs.
• Lead changeover activities of area equipment and ensure work is completed without rework.
• Complies with all safety rules, procedures and works instructions.
• Maintain a high standard of housekeeping and hygiene in the department and follow 5S Housekeeping principles.
• Ensures that area equipment are in base condition and runs to deliver target area results in terms of stops, breakdowns and downtime.
• Develop troubleshooting guide for Packaging area equipment
• Develop work instructions for area equipment and units
• Ensures area process audit is done and properly documented
• Report PA outages and follow up with the process engineer and process specialist to close out all outages.
• Communicate best operating practice across all shift
• Lead the trouble shooting and problem solving on all modules in this section.
• Build the capability of area operators through regular coaching.
• To monitor the availability of spare parts in the warehouse and, if no specific parts are found, immediately notify the mechanical engineer

Qualifications

• Prior high-speed production machine maintenance or operating experience, especially on Diaper machines will be advantageous
• Computer Literate
• Higher National Diploma HND in Mechanical or Industrial Engineering.
• Minimum of 5 years’ experience on high-speed production equipment.

Job Title: Shift Mechanical Technician Job ID: 803995 Location: Lagos Time Type: Full time Worker Sub-Type: Regular

Job Descriptions Safety:

• Carries out continual development of process optimization to ensure safety.
• Ensures compliance to all departmental and plant safety rules and regulations.  All non-conformances should be dealt with immediately all unresolved issues must be raised with Asset Leader. Follow the correct WI and Process Instruction for all tasks performed.

Productivity:

• Carries out mechanical changes during product and tier changes on the asset in order to minimise change over delay
• Works on continuous improvement plans to upgrade/improve the asset performance and capability.
• Ensure all documentation are recorded properly and systematically to provide optimum reliability of the asset.
• Supports production within the diaper operation by providing mechanical support to the production teams.
• Carries out action plans as directed in order to solve problems thereby minimizing mechanical delay.
• Analyses mechanical delay and together with the Day Mechanical Technician resolve problems of a mechanical nature to ensure minimum delay.

Maintenance:

• To ensure equipment standardisation, recommendation of changes in maintenance policies, fault finding and problem solving.
• Recommend spares requirements to the Mechanical Engineer and Asset Leader to ensure that mechanical spares are available and ready for use when required.
• Provide technical information to maintenance teams detailing work requests for planned and reactive maintenance
• Carry out condition monitoring inspection on equipment and replacing of all wearing parts in accordance with the relevant PM schedules.
• To carry out preventive maintenance activities on all mechanical equipment and installation.

Projects:

• Assists in plant project formulation
• Provides mechanical support during projects in the plant.

Housekeeping:

• Maintain 5S housekeeping principles in the department at all times, including all equipment and surrounds.  Ensure all unused items are removed from the operating area and stored correctly.

Qualifications

• Prior high-speed production machine maintenance or operating experience, especially on Diaper machines will be advantageous.
• PC Literate
• Higher National Diploma HND or equivalent in  Mechanical Engineering
• Minimum 5 years’ experience on high-speed production equipment, of which at least 3 years must be process experience.

Global VISA and Relocation Specifications:

• A role in the new mill.  It is open to all eligible citizens of Nigeria

Job Title: Niche Technician (Fluff) Location: Lagos Worker Type: Employee Worker Sub-Type: Regular Time Type: Full time

Job Description

• To monitor the availability of spare parts in the warehouse and, if no specific parts are found, immediately notify the mechanical engineer
• Perform modular process health checks in-line with center-lining guidelines.
• To analyze breakdowns and failures, downtime, reliability of equipment, identify problem nodes, if possible, to eliminate inconsistencies.
• Compile all area issues and reasons for stops and provide a proper update at the support meeting
• Lead and actively participate in all work and repairs which are carried out in FCO section by the support teams
• Initiate and ensure proper maintenance and improvement of area equipment.
• Adjust the schedule of planned maintenance in the event of an emergency equipment failure and investigate the incident with a precautionary plan.
• Ensure equipment and area centreline is maintained at all times
• Timely provide update on the changes and improvements made to operating teams and shift technicians
• To provide clarifications and training for operators and contractors on how to carry out work and operation of equipment safely, and to carry out repairs.
• Lead changeover activities of area equipment and ensure work is completed without rework.
• Complies with all safety rules, procedures and works instructions.
• Maintain a high standard of housekeeping and hygiene in the department and follow 5S Housekeeping principles.
• Ensures that area equipment are in base condition and runs to deliver target area results in terms of stops, breakdowns and downtime.
• Develop troubleshooting guide for Fluff area equipment
• Develop work instructions for area equipment and units
• Ensures area process audit is done and properly documented
• Report PA outages and follow up with the process engineer and process specialist to close out all outages.
• Communicate best operating practice across all shift
• Lead the troubleshooting and problem solving on all modules in this section.
• Build the capability of area operators through regular coaching.

Qualifications

• Prior high-speed production machine maintenance or operating experience, especially on Diaper machines will be advantageous.
• Computer Literate.
• Higher National Diploma (HND) in Mechanical or Industrial Engineering.
• Minimum of 5 years experience on high-speed production equipment.

Global VISA and Relocation Specifications:

• A new role in the mill
• It is open to all eligible citizens of Nigeria.

Job Title: Receiving Clerk Ref Id: 803886 Location: Nigeria -Lagos Job Type: Full time Worker Type: Employee Worker Sub-Type: Regular

Job Description

• Communicate materials received to all interfaces involved
• Update all reconciliation of all material usage
• Liaise with administrative staff, production floor members, team leaders, managers and external customers.
• Adhere to safety and housekeeping policies / procedures.
• Provide training to new staff members if requested
• Receives and checks all goods and materials as per supplier’s delivery note and carry out all documentations required.
• Generate material documents by entering received goods into SAP/ERP.
• Carry out cycle counts on all inventory items.
• Forward receiving documents to Functional Buyer.
• Coordinating the offloading of goods and materials from delivery vehicles.

Qualifications

• Knowledge of SAP and good telephone and general communication skills.
• 2-3 Years’ experience in materials handling and receiving.
• National Diploma (ND) in either Statistic, Mathematics or any Engineering field.
• PC Literate,

Global VISA and Relocation Specifications:

• A role in the new mill.

Job Title: Forklift Driver - Receiving Day Ref Id: 804069 Location: Nigeria -Lagos Job Type: Full time Worker Type: Employee Worker Sub-Type: Regular

Job Description

• Move finished goods from production departments to finished goods warehouse
• Record production through scanning and recording of products.
• Support daily, weekly, monthly, and annual stock counts
• Maintain and report any faults on fork trucks
• Maintain good safety, housekeeping, storage and stacking standards in working area.
• Pick materials, as per material requisitions, from raw material warehouse and move the stock to the allocated areas in the various production departments.
• Return all unused materials back to the raw material warehouse.
• Ensures that all pallets of Finished Goods are neatly stretch wrapped.

Qualifications

• Valid forklift driver license with one year practical driving experience.
• National Diploma or Trade Test III with a minimum of one year experience in a FMCG raw material warehouse.

Global VISA and Relocation Specifications:

• A role in the new mill. It is open to all eligible citizens of Nigeria.

Job Title: Inventory Officer (Raw Materials Warehouse) Location: Lagos Worker Type: Employee Worker Sub-Type: Regular Time Type: Full time

Job Description

• Machine hour recording:
  • Enters machine hours provided by Operations into SAP
  • R/3 once a week (once a day)
• Material Supply to operations:
  • Calls of raw materials,& finishing supplies form from Warehouse (Lagos DC) 4961 via STO in SAP to (Lagos Diaper Plant 4960)
• Material returns
  • Returns materials back to the warehouse(4961) via an STO in SAP from Diaper plant (4960)
• Production declaration:
  • Declares production in a timely manner based on information provided from operations
• Material consumption:
  • Reviews backlushing error report (COGI) daily and solves errors in report (in collaboration with planning / operations / finance)
  • Does frequent material stock counts at shop floor and adjusts system stocks to match actual stocks
  • Reviews & analyses count differences and shares outcomes with Mill planning and operations to drive data & BOM accuracy

Qualifications

• Computer skills (Excel, Word etc essential)
• Basic SAP knowledge
• National Diploma (ND) in either Commercial, Social Science, or Engineering Field.
• Experience in Warehousing / Materials handling & management

Global VISA and Relocation Specifications:

• A role in the new mill. It is open to all eligible citizens of Nigeria.

 

How to Apply Interested and qualified candidates should: Click here to apply