Willers Solutions Limited Job Vacancies


Willers Solutions Limited is recruiting on behalf of her clients in various sectors to fill the following positions below:
 
Job Title: Marine Operations Manager Location: Port-Harcourt, Rivers
Job Description
  • Supervises Operations and Vessel budget preparation
  • Reviews monthly operational budget results, implements monthly variance reporting as compared to budget and advice on expenditure trends.
  • Provides all the necessary support to ensure timely port turnaround and shipyard repair activities.
  • Monitors/rectifies non-compliance to vessel operating and SMS procedures.
  • Manage and execute all Maritime Operations in order to optimize service levels and operational efficiency.
  • Oversees all operational activities to ensure high quality and optimized service delivery.
  • Provide positive stakeholder relationship with all suppliers and service providers.
  • Optimizes fleet capacity utilization and standardization o Investigates new opportunities for deriving value from marine services competencies
Qualification
  • Minimum of 10 years’ experience as a marine operations manager
  • Knowledgeable and highly experienced with security escort operations Nigerian nationality Operations Manager
  • Minimum of B.Sc. Degree in Mechanical Engineering or Naval Architecture or Marine Management
  How to Apply Interested and qualified candidates should send their CV “MS Word” to: [email protected] Using “Marine Operations Manager” as mail subject. Note: Only qualified candidates will be contacted,      
Job Title: Marine Technical Manager Location: Port-Harcourt, Rivers
Job Description
  • Vendor Technical Relations- everything ranging from evaluation of spare parts, requisition, supply, maintenance and safe operations of the vessel
  • Liaising with clients, crew and local stakeholders.
  • Appoint and manage subcontractors for vessel maintenance and services.
  • Charter Technical Audits- supervision, investigation, point of contact in developing client relations o Statutory Compliance should be met in every aspect be it port state control, vessels with class society among other responsibilities.
  • Vessel Management, the technical part as well as overall management of the process.
  • Vessel Maintenance (Planned & Preventive) and Repair Management:
  • Health, Environmental and Quality Policies and Procedures.
  • Vessel Dry-docking – start to end process
Qualification
  • Extensive knowledge and experience in Marine Operations; marine engines, generators and technical aspects of vessels
  • Minimum of 10 years' experience as a Marine Technical Manager.
  • Minimum of B.Sc. Degree in Mechanical Engineering or related discipline.
  How to Apply Interested and qualified candidates should send their CV “MS Word” to: [email protected] Using “Marine Technical Manager” as mail subject.      
Job Title: Naval Commander (Retired) Location: Rivers
Job Descriptions
  • Training of security staff and shipping crew on weapon handling, vigilance and loss prevention mechanisms, and international laws pertaining to shipping industry.
  • Preparing reports on key security metrics and sharing it with concerned authorities for real time monitoring
  • Maintenance of technical security equipment such as CCTVs, communication devices to ensure security readiness round the clock
  • Ensure maximum security of vessels as per the guidelines and standard operating procedures (SOPs) as laid by the organization.
  • Ensure the operations team are fully up to date with all ongoing operators and deal with any daily issues regarding embarked Navy teams, be it the Nigerian authority facing representatives.
  • Ensure safety and security of shipping crew and shipping assets both on land and sea environments.
  • Responsible for carrying drills and security & safety procedures on large ships cruising in international and piracy prone waters for averting any risks by continuously monitoring threats and vulnerabilities; and responding with necessary action as required.
Requirements
  • Min of 20 years’ experience of MARINE and VESSEL OPERATIONS.
  • Must have related Trainings / certifications of International Maritime Standards.
  • A retired Nigerian Naval Commander / Commodore with trackable records of Maritime Security Services.
  How to Apply Interested and qualified candidates should forward their CV "MS Word format" to: [email protected] using "Retired Navy Commander" as the email subject.      
Job Title: Legal Associate Location: Port-Harcourt, Rivers
Job Descriptions
  • Offer advice on the law, legal procedures and a wide range of associated issues.
  • Attend and represent the firm at client meetings.
  • Draw up contracts and other legal documents.
  • Represent clients in Courts where required.
  • Product liability litigation caseload and other cases of company-wide significance
  • Develop and execute litigation strategy, manage discovery obligations, manage outside counsel, determine proper case disposition, and monitor litigation
  • Maintain good client relationship skills, gaining clients’ confidence and that of other professionals.
Requirements
  • Minimum of 7 years post NYSC experience as a "Legal Associate" with practicing experience in related firms.
  • Minimum of LL.B, BL and LL.M with not less than Second Class Upper (Class Degree)
  How to Apply Interested and qualified candidates should forward their CV "MS Word format" to: [email protected] using "Legal Associate" as email subject.      
Job Title: Marine Operations Manger Location: Port Harcourt, Rivers
Job Description
  • Supervises Operations and Vessel budget preparation
  • Reviews monthly operational budget results, implements monthly variance reporting as compared to budget and advice on expenditure trends.
  • Provides all the necessary support to ensure timely port turnaround and shipyard repair activities. o Monitors/rectifies non-compliance to vessel operating and SMS procedures.
  • Manage and execute all Maritime Operations in order to optimize service levels and operational efficiency.
  • Oversees all operational activities to ensure high quality and optimized service delivery.
  • Provide positive stakeholder relationship with all suppliers and service providers.
  • Optimizes fleet capacity utilization and standardization o Investigates new opportunities for deriving value from marine services competencies
Qualifications
  • Minimum of 10 years’ experience as a marine operations manager
  • Knowledgeable and highly experienced with security escort operations Nigerian nationality Operations Manager.
  • Minimum of a B.Sc. Degree in Mechanical Engineering
  • Naval Architecture or Marine Management
 
How to Apply Interested and qualified candidates should send their CV “MS Word” to: [email protected] Using “Marine Operations Manager” as mail subject.
     
Job Title: Field Engineer Location: Port Harcourt, Rivers
Responsibilities
  • Ensure strict compliance to all operational and procedural guidelines.
  • Routine checks of equipment on equipment.
  • Ensure that daily activity report and other relevant reports are sent to the client / organization in a timely manner.
  • Liaise with Supervisor and team members on job requirements prior to mobilization.
  • Coordinate onshore preparation and installation of relevant equipment.
  • Work alongside Supervisor and team members to ensure completion of projects within stipulated timeline.
Qualifications
  • Minimum of 3 years experience.
  • Knowledge of rig systems and drilling/completion/production operations.
  • University Degree in Engineering.
 
How to Apply Interested and qualified candidates should send their CV in MS Word to: [email protected] using "Filed Engineers” as the subject of the mail.      
Job Title: Gravel Pack Specialist Location: Port-Harcourt, Rivers
Responsibilities
  • Submits accurate and timely paper work, inclusive of job reports and captures any lessons learned.
  • Performs in the role of a mentor to Field Specialists and Field Engineers.
  • Liaises with the Client on location and assists in troubleshooting.
  • Ensures installation procedures are in order without compromising safety.
  • Handles all other responsibilities as advised by Management.
  • Leads Sand Control gravel pack Completion Installations.
  • Focal point for communication with the client at the well-site.
  • Running / retrieving Lower completion packers.
  • Participates / Leads the job preparation process in accordance with Schlumberger or client specific Quality Plans.
 
How to Apply Interested and qualified candidates should send their CV "MS Word" to: [email protected] using "Gravel Pack Specialist" as mail subject.
     
Job Title: Electronics Technician Location: Port-Harcourt, Rivers
Responsibilities
  • Maintain documentation of system installation and maintenance procedures.
  • Recommend upgrades and modifications to improve system performance
  • Understand drawings, technical manuals and instructions for perform system installation activities.
  • Provide adequate data information for both internal and external job analysis (AAR’s).
  • Maintain a clean and sound reporting system between the team leaders and other line managers as the case may be.
  • Maintain all the data acquisition system as to report to Well Operations Manager due time for external licensing as required.
  • Follow up with all calibrations and re-calibrations of tools and accessories attached to all our Data Acquisition System (DAS).
  • Mentor and guide other team members when required.
  • Report completed and ongoing to tasks to supervisor on daily basis.
  • Install and assemble of electronic systems based on technical specifications.
  • Perform regular inspections to identify defects and replacements.
  • Determines and develops resolution to an assortment of problems encountered on all data acquisition system which cuts across Slickline and Well Services Operations.
  • Perform system testing to evaluate performance and functionality.
  • Ensures that the data acquisition system of all our operational equipment are in good working condition.
  • Detect and amend all faults related to our data acquisition system.
  • Make a planned requisition of all spare parts for the maintenance of data acquisition system.
  • Develop a robust annual maintenance plan for all our data acquisition systems.
  • Ensure online data acquisition is in sound state on and off customer’s worksite.
  • Maintain inventory control of electronic components and tools.
Qualification and Experience
  • B.Sc / B.Tech Electrical Electronics as an added advantage.
  • Min of 2 -3 years as an Electronic Technician
  • OND / HND: Electrical Electronics as minimum certificate.
  How to Apply Interested and qualified candidates should send their CV "MS Word" to: [email protected] using "Electronics Technician" as mail subject.      
Job Title: QHSE Coordinator Location: Port-Harcourt, Rivers
Responsibilities
  • Provide QHSE support and input for tenders and bids.
  • Review and help to develop QHSE competence standards within the department and the organization.
  • Monitor changes to legislation and assess the impact on the business.
  • Review and analyze data from audits, accident investigations, near misses, concessions, defect reports and customer complaints to identify adverse trends and implement preventive action.
  • Coordinate the organization’s Management Review process.
  • Identify and facilitate continuous improvement opportunities and monitor progress.
  • Ensures operations are conducted in a safe and efficient manner and in conformance to the requirements of industry and other third-party standards.
  • Develop an annual corporate QHSE Audit Program.
  • Builds effective relationships with clients, subcontractors and partners to support the Company's core QHSE values.
  • Conduct integrated QHSE audits.
  • Files QHSE documents and participates in job risk analysis and continual improvement.
  • Develop annual budgets for QHSE activities.
  • Develop and maintain corporate QHSE procedures, Quality Plan for projects and maintain the organization’s Quality Manual.
Qualifications
  • Has in-depth understanding of international standards and procedures and makes appropriate decisions based on this knowledge.
  • Has experience in accident and incident investigation.
  • Must have analytical experience, be accurate with statistics and written reports, well organized and exercise sound judgment in decision making.
  • Has in-depth understanding of international standards and procedures and makes appropriate decisions based on this knowledge.
  • B.Sc Degree Engineering and relevant professional certification (NEBOSH, Lead Auditor qualification and so on).
  • Minimum of 10 years’ experience developing and maintaining management systems for QHSE in the Oil and Gas industry.
  • An experienced people manager with the ability to lead, coach and mentor teams.
  • Must have analytical experience, be accurate with statistics and written reports, well organized and exercise sound judgment in decision making.
  How to apply Interested and qualified candidates should forward their CV in MS Word Format to: [email protected] Using "QHSE Coordinator" as the mail subject.      
Job Title: Cementing Supervisor Location: Port-Harcourt, Rivers
Responsibilities
  • Ensuring material safety data sheets, risk assessment and safety meeting forms including third party meeting are in the well file.
  • Conduct post job meeting with the service team.
  • Perform on the job training of subordinates.
  • Responsible for the execution of all cementing jobs flawlessly.
  • Ensure that all jobs are performed in a safe manner.
  • Ensure a good up keep of equipment at all time to avoid down time (NPT) during operation.
  • Responsible of supervision of equipment maintenance and site operations.
  • Supervision in such a manner as to minimize or correct all problems as they occur and prior to the execution of the next step procedure.
  • Ensuring actual slurry volume must be recalculated by the customer prior to the job based on actual well data and casing tally and surface line volumes.
  • Ensuring that all required information and document are recorded and available at the well site.
Qualifications
  • Management / supervisory skill set.
  • Excellent technical and communication skills.
  • First degree in any Engineering discipline and professional certification required.
  • Minimum of 15 years relevant work experience with 10 years spent in a managerial role.
  How to Apply Interested and qualified candidates should forward their CV in MS Word Format to: [email protected] Using "Cementing Supervisor" as the mail subject.      
Job Title: Marine Technical Manager Location: Port-Harcourt, Rivers
Job Description
  • Vendor Technical Relations- everything ranging from evaluation of spare parts, requisition, supply, maintenance and safe operations of the vessel
  • Liaising with clients, crew and local stakeholders.
  • Appoint and manage subcontractors for vessel maintenance and services.
  • Charter Technical Audits- supervision, investigation, point of contact in developing client relations o Statutory Compliance should be met in every aspect be it port state control, vessels with class society among other responsibilities.
  • Vessel Management, the technical part as well as overall management of the process.
  • Vessel Maintenance (Planned & Preventive) and Repair Management:
  • Health, Environmental and Quality Policies and Procedures.
  • Vessel Dry-docking - start to end process
Qualifications
  • Extensive knowledge and experience in Marine Operations; marine engines, generators and technical aspects of vessels
  • Minimum of 10 years' experience as a Marine Technical Manager.
  • Minimum of B.Sc. Degree in Mechanical Engineering or related discipline.
 
How to Apply Interested and qualified candidates should send their CV in "MS Word" to: [email protected] Using “Marine Technical Manager” as the mail subject.
   
Job Title: Equipment Operator (Crane Operator, Coil Tubing Operator) Location: Port-Harcourt, Rivers
Responsibilities
  • Provides assistance in equipment clean up and post-job equipment maintenance.
  • Attending pre-job planning meetings in preparation for job mobilization and post-job meetings, reviewing critical steps and procedure.
  • Ensuring compliance to all safety related standards and processes, contributing to the sustainability of the GOAL ZERO movement.
  • Working with other technical experts like crane operators, coiled tubing operators and giving the needed assistance.
  • Carry out other tasks and duties as directed/assigned by the Line Manager.
  • Drive and control the applicable equipment.
  • Provide support for the successful completion of projects.
  • Operate the equipment in the right direction and angles to prevent accidents.
  • Perform periodic safety, maintenance or servicing checks to ensure proper functioning of the equipment.
  • Operate the equipment manually and also through the use of electronic or technical modes of operation.
  • Maintain a database to record daily activities.
  • Work alongside the truck drivers in checking the engine and other components in order to ensure that all processes are duly followed.
  • Providing general support and assistance in both technical and non-technical areas pertaining to job execution.
Qualifications
  • Must have at least 5 years’ experience in working in the Oil and Gas industry.
  • Must be physically / medically fit in order to operate heavy and power-driven equipment.
  • Competency Certification
  How to apply Interested and qualified candidates should forward their CV in MS Word Format to: [email protected] Using "Equipment Operator" as the mail subject.    
Job Title: Senior Equipment Operator Location: Port-Harcourt, Rivers
Responsibilities
  • Carry out proactive monitoring of the process conditions and ensure that the operating parameters are kept within the limits specified by industry standards as well as the company guidelines.
  • Prepare equipment for maintenance in accordance with appropriate procedures and maintain communication with the Supervisor to enhance proper permits to work documentation preparation.
  • Acknowledge the signed job completion certificates/permit and monitors the satisfactory completion of the job to ensure safe recommissioning of equipment back to service.
  • Assist the Supervisor in the training and development of Operators to enhance improvement in their overall performance on the job.
  • Works alongside the Supervisor to ensure that set targets are achieved as it relates to projects.
  • Assist the Supervisor in developing work schedules for operators and carry out daily routine and non-routine operations with the Operators in line with HSE considerations to prevent HSE incidents and accidents.
  • Ensure that defects as observed are reported and maintenance effectively followed up by carrying out safety checks during the performance of maintenance activities in order to prevent unsafe acts and conditions.
Qualifications
  • Must have at least 10 years’ experience in working in the Oil and Gas industry.
  • Must be physically / medically fit in order to operate heavy and power-driven equipment.
  • Competency Certification
 
How to Apply Interested and qualified candidates should forward their CV in MS Word Format to: [email protected]Using "Senior Equipment Operator" as the mail subject.  
   
Job Title: Supervisor Trainee (Cementing / Pumoing, Coil Tubing and Slickline) Location: Port-Harcourt, Rivers
Responsibilities
  • Ensure good mobilization plan, spotting and rig up plan.
  • Ensure permit to work (PTW) are filed and signed before the job and are closed out after expiration of job.
  • Ensure reporting of observation cards by every member of the team and ensure concerned items are closed out.
  • Conduct JSA and document same prior to job execution at the rig site.
  • Ensure monthly equipment log, personnel log duly signed by company rep, chats, inventory and other paper work are remitted to base.
  • Ensure all filled tickets are signed by company rep and reverted to base.
  • Ensure company’s policy and procedures are duly compiled with it.
  • Working closely with the Supervisor in charge to ensure that all work procedures relating to all projects are fully complied with.
  • Ensure that all equipment and connections are serviced and fit for purpose before and after the job.
  • Conduct pre-trip and post trip checks on the equipment.
  • Ensure that all data capturing and monitoring devices are functional and accurate before the job.
  • Ensure all safety gears and lifting certificates are dated and filed.
Qualifications
  • Minimum of 7 years’ experience.
  • Knowledge of rig systems and drilling/completion/production operations
  • University Degree in Engineering and other relevant professional certifications.
 
How to Apply Interested and qualified candidates should forward their CV “MS Word Format” to: [email protected] Using “Supervisor Trainee (Cementing / Pumoing, Coil Tubing and Slickline)" as the subject of the mail.  
   
Job Title: QA / QC Engineer Location: Port-Harcourt, Rivers
Responsibilities
  • Supervises equipment calibration management activities.
  • Supports the Welding & Non-Destructive Test (NDT) qualification activities.
  • Works alongside the Project Engineer to analyze and close out on non-conformities.
  • Manage lifting of all equipment and handle efficient storage of all hazardous materials and perform quality audits as per required schedule.
  • Manage all work methods and maintain knowledge on all quality assurance standards.
  • Review of supplier quality plans against contract requirements.
  • Assist in the review of vendor’s inspection procedures and personnel qualifications.
  • Take part in vendor audits and surveillances.
  • Review the quality of all materials at site and ensure compliance to all project specifications and collaborate with relevant department for all material procurement and maintain quality of materials.
  • Ensure employees adhere to all quality standards and ensure compliance to the requirements of the quality manual.
  • Collaborate with contractors and suppliers to maintain the integrity of all systems.
  • Evaluates the qualifications of Welders and Non-Destructive Test (NDT) technicians with regard to the activities assigned.
  • Identify and manage Quality related risks that may impact the Technical Integrity of all projects.
  • Supports and participates in all internal/external audits.
  • Coordinates the relevant Tracking Systems for correct identification of materials.
Qualifications
  • Experience in developing and reviewing project quality plans, contract documents and project specifications
  • Coordinate Test Pack preparation and Final Handover documentation activities to ensure smooth handover.
  • Conduct and organize QMS Internal/External audit and ensure close out of all Inspection and Audit Non- Conformities.
  • Degree in any Engineering discipline and relevant professional certification.
  • Minimum 5 years of experience in QA/QC with at least 3 years’ experience in both offshore and onshore facilities.
  • Experience in welding and other NDT methods.
 
How to Apply Interested and qualified candidates should forward their CV in MS Word Format to: [email protected]Using "QA / QC Engineer" as the mail subject.  
   
Job Title: Coil Tubing Supervisor Location: Port-Harcourt, Rivers
Responsibilities
  • Maintain communication with client wellsite representative, rig crew, and field support staff.
  • Participate in knowledge sharing.
  • Ensure all reporting requirements are completed on schedule.
  • Follows up on service quality events with operations management team and ensure incident reports are closed with clients.
  • Ensure work is performed in compliance with service quality, health, safety, and IT standards.
  • Provide support to crew and clients at wellsite.
  • Plan operations and ensure materials are rigged up, tested, and ready to perform the job.
  • Prepare and deliver comprehensive job reports.
  • Manage storage and inventories of supplies and fixed assets on the rig.
Qualifications
  • Management / supervisory skill set.
  • Excellent technical and communication skills.
  • First degree in any Engineering discipline and professional certification required.
  • Minimum of 15 years relevant work experience with 10 years spent in a managerial role.
 
How to Apply Interested and qualified candidates should forward their CV “MS Word Format” to: [email protected] Using “Coil Tubing Supervisor" as the subject of the mail.
   
Job Title: Slickline Operations Supervisor Location: Port-Harcourt, Rivers
Responsibilities
  • Maintains well-site records and communication as required by head of department.
  • Carries out proper job related paper work and participates actively in quality improvements efforts with respect to Slickline operations.
  • Promotes and maintains good customer relations.
  • Follows safe work procedure, practices and instructions and performs the role of health and safety compliance officer within the team if designated.
  • Provides needed inputs for the development and updating of equipment and logistic manuals.
  • Carries out all required responsibilities safely as described in managing base operations, well operations.
  • Supervise and provide direction for the Slickline crew.
  • Provides advice as it relates to servicing mechanical devices, building cable heads and tool maintenance.
  • Performs necessary operational duties at the well-site and at the base including rigging up and down of Slickline equipment for job specific purposes.
  • Develop hoisting skills in different situations such as phishing operation, BHP survey operations, testing operations, vertical tool make up and deviated wells.
Qualifications
  • Management / supervisory skill set.
  • Excellent technical and communication skills.
  • First degree in any Engineering discipline and professional certification required.
  • Minimum of 15 years relevant work experience with 10 years spent in a managerial role.
 
How to Apply Interested and qualified candidates should forward their CV “MS Word Format” to: [email protected] Using “Slickline Operations Supervisor" as the subject of the mail.  
   
Job Title: Well Operations Manager Location: Port-Harcourt, Rivers
Responsibilities
  • Ensures timely reporting from crews on daily materials/resources utilization to ensure efficiency and optimization in the use of resources.
  • Deliver continuous performance improvement by efficient management of site resources and use of best practices in project delivery.
  • Ensure that all activities by site personnel are coordinated and in compliance with permit to work.
  • Ensure that lessons learnt are captured and shared effectively with on and offsite teams
  • Handle all other responsibilities as advised by Management.
  • Provides Management with operational and business feedback to facilitate better operational and strategic planning.
  • Supervises the activities of field staff at worksites to ensure performance meets clients’ quality expectation and safety standards.
  • Provides information on resource requirements for all well services operations to facilitate project budgeting and funding.
Qualification
  • Management / supervisory skill set.
  • Excellent technical and communication skills.
  • First degree in any Engineering discipline and professional certification required.
  • Minimum of 15 years relevant work experience with 10 years spent in a managerial role.
 
How to Apply Interested and qualified candidates should forward their CV “MS Word Format” to: [email protected] Using “Well Operations Manager" as the subject of the mail.
  Application Deadline 30th January, 2020.      
Job Title: IP Operations Engineer Location: Lagos
Job Description
  • Troubleshoot Core network problems.
  • Upgrade core network equipment and configuration.
  • Provide technical support for corporate clients.
  • Design implements and support IT, Security and Network Solutions for corporate clients.
Personal Responsibilities
  • Responsible for achieving any assignment given by the Manager
  • Keeping up to date with departmental and company notification via Emails, Notice board and other mediums
  • Keeps himself up-to-date with the technologies required by companies.
  • High ability and readiness for any kind of urgent intervention at client sites to meet SLAs.
  • Report to the Head of Department.
  • Responsible for all assigned equipment to his team.
  • Should maintain a high level of personal responsibility in order to be an example to colleagues.
  • Abide and apply the rules and regulations of the department and the company as a whole.
Academic / Education Qualifications
  • Must be CCNA or CCNP certified.
  • Must have good verbal and writing skills.
  • B.Sc (or equivalent) in Computer Science, Computer Communication Engineering or Telecom.
  • Minimum of 3 years proven hands-on experience in network engineering
Technical Skills:
  • Good Knowledge in Unix Servers (Redhat, Centos, and Debian…)
  • Ability to understand and work on new technologies and to quickly adopt to equipment made by different vendors.
  • Ability to design topologies and provide consultancy for corporate customers.
  • Troubleshooting, diagnosing and resolving hardware, software, and other network and system problems.
  • LAC/LNS Implementation and troubleshooting knowledge.
  • MPLS L2VPNs, L3VPNs and VPLS knowledge is a plus.
  • Cisco ASA and Juniper firewalls configuration and maintenance is a plus.
  • In depth knowledge of TCP/IP protocol stack
  • Configuration and maintenance of network equipment including routers, switches, Firewalls
  • Experience in Mikrotik and cisco devices configuration
  • Solid Understanding of Layer 3 technologies (EIGRP, OSPF, BGP..) and layer 2 technologies(VLAN, trunks, STP..)
  • Maximizing network performance through ongoing monitoring and troubleshooting
 
How to Apply Interested and qualified candidates should send their CV in Ms Word Format to: [email protected] using “IP Operations Engineer” as the subject of the mail.
  Application Deadline 25th January, 2020.      
Job Title: IT Manager Location: Lagos
Job Descriptions
  • To setup required account for new team members and ensure effective induction on use of IT Resources along with Do’s and Don’ts.
  • To work on various running or new projects as and when assigned.
  • To coordinate and liaise with solution providers as and when any technical issue arises.
  • To prepare all applicable reports in time for accuracy and in order to ensure that they match the functional requirements, policies and standards.
  • To create and maintain documentation as it relates to network configuration, mapping, and hardware installation, updates, purchase & service records.
  • To keep record of complaints, inventory, asset movements etc.
  • To design develop & troubleshoot LAN / Wireless network including servers, routers, hubs, switches, ups, printers & other hardware.
  • To handle installation, configuration, maintenance, and troubleshoot hardware, software, network related issues as and when faced by users.
  • To ensure network connectivity of all servers, workstations, telephony equipment, scanners, printers, copy machines, and other network appliances.
  • To ensure timely closure of departmental complaints or issues as faced by other colleagues.
Qualification and Experience
  • HND or Engineering in IT / Computer Science (MCSE, CCNA or similar certificates shall be preferred but not mandatory)
  • Hands on experience in maintaining LAN, WAN, Thin Clients, Printers, Outlook, MS Office etc.
  • Experience of minimum 7+ years in working on the similar role.
 
How to Apply Interested and qualified candidates should forward their CV "MS Word Format" to: [email protected] using "IT Manager" as the email subject.  
   
Job Title: Accountant Location: Portharcourt, Rivers
Job Responsibilities
  • Accounts Payable - Receive supplier invoices, code appropriately and send for approval -daily; Input all approved supplier invoices into Odoo; Ensure all monthly invoices are received, otherwise take provisions; Run creditors report and publish ;Prepare Supplier payments
  • Tax Returns : Paye, VAT & WHT computation & rendition
  • Customer Accounts - Post customer receipts into account and reconcile customer accounts - daily; Ensure individual departmental reports match system generated report, and produce Group receivables
  • Inventory/Stock Mgt – Ensure all stock-in & stock-out are well managed & reconcile with the General Ledger & Reports.
  • Management Reports – produce monthly P&L & Balance Sheet Report
  • Expense Control & Mgt Function.
  • Payroll. Treasury Mgt, Insurance, Budgeting and
  • Perform other functions as assigned by the DMD/MD.
  • General Ledger - Set up new accounts in general ledger; Review/Reconcile general ledger accounts - Weekly; Write and post journal entries (duly approved) for reclassification of expenses as needed- Weekly; Closure of monthly ledger (ensure all costs are taken in) ;Run /check trial balance
  • Bank reconciliation/ Budget & Audit preparation - Prepare monthly bank reconciliations; Adjust reconciling items as appropriate; Budget/Audit as Required
  • Fixed Asset register - Ensure maintenance of Capitalization limits Update fixed asset Register with additions and disposals; Keep file of all invoice copies related to Fixed assets; Run monthly depreciation.
  • Accounts Receivables – Ensure invoicing of customers occur as and when they are due; Follow through on payments due & reconcile accordingly; Provide Debtors Ageing Report consistently.
Qualifications
  • Minimum of Second Class Upper or Upper Credit.
  • Professional Certification is a MUST and thus, interested Candidates must be Chattered Accountant.
  • Minimum of B.Sc. Degree in Accounting, Banking and Finance or any related discipline.
  • Minimum of 5 years’ experience as an Accountant.
 
How to Apply Interested and qualified candidates should forward their CV “MS Word Format” to: [email protected] Using “Accountant_PH" as the subject of the mail.  
   
Job Title: Product Sales Engineer Location: Lagos
Job Descriptions
  • Follow up on the business starting from lead-generation, negotiation, order placement and successful execution.
  • Submit quotations in-line with customer technical specifications and company’s pricing policy.
  • Identify, Coordinate and follow up on projects until final execution while ensuring high quality customer service and satisfaction
  • Provide pre-and after sales technical assistance and support , product training, in addition to developing and presenting support material to customers ( technical presentations, brochures, reports, etc….)
  • Prepare accurate and timely reports on clients’ visits, sales forecasts and others as require by Management
  • Meet assigned Targets and Objectives as agreed in the management sales meetings
  • Liaise and coordinate with inter-company teams and departments (sales, service, logistics, etc…) to ensure high quality customer service and satisfaction.
  • Establish, develop and maintain business relationships with existing and prospective clients in the Oil & Gas sector
  • Promote the Company’s range of product offerings and services, attend trade shows, conferences and other marketing events
  • Conduct regular visits to clients’ sites to follow up on business, identify new opportunities and attend to customer complaints and queries
  • Expand customer base and actively market & promote the company’s products
  • Identify and interpret customers’ requirements and attend to them efficiently and in a timely manner
Qualification and Experience
  • Knowledge of the Oil and Gas Process is a MUST.
  • Experience & Knowledge of either valves & actuators or gas detectors & metering/ electronics is also a MUST.
  • B.Sc Degree or its equivalent in Mechanical Engineering or any related field
  • Min of 5-8 years of experience, preferably in Oil and Gas related field
Required Skills and Competencies:
  • Communication skills
  • Problem solving skills
  • Report writing skills
  • Presentation Skills
  • Multi-tasking, prioritizing and time management skills
  • Positive and winning attitude
  • Team player and good work ethics
  • Very good command of English (spoken and written)
  • Proficiency in MS Office (Word, PowerPoint , excel, etc.…)
  • Job requires frequent traveling within the country
  • Customer service skills
 
How to Apply Interested and qualified candidates should forward their CV "MS Word Format" to: [email protected] using "Product Sales Engineer" as the email subject.
  Application Deadline 23rd January, 2020.