Massive Recruitment at Saipem Contracting Nigeria Limited, 25th April, 2017

---

Saipem is a global leader in the Engineering, Procurement, Construction & Installation Businesses, with a strong inclination towards oil & gas-related activities in remote areas. We excel in the provisioning of engineering, procurement, project management and construction services, with distinctive skills and capabilities in the design and execution of large-scale offshore and onshore projects. We are recruiting to fill the position below: Job Title: Commissioning Operation Superintendent Reference Code: COSTD_04 Location: Any City, Nigeria Responsibilities / Requirements

• Verify that pre-commissioning, commissioning and start up requirements are accounted for in engineering documents
• Prepare and keep up-to-date pre-commissioning, commissioning, start up and test run execution plans (including the mobilization of personnel)
• Review all precommissioning, commissioning, start up and handing over procedures as well as supervise the preparation of additional procedures when required
• Review the Licensors / Vendors schedule and assignment, concerning precommissioning, commissioning, start up and test run activities
• Supervise the preparation of the integrated pre-commissioning, commissioning, and start up and test run Schedule.
• Run utility equipment as needed for Commissioning purpose
• Assist the Commissioning Manager in the plant hand over activities
• Monitor the use and availability of commissioning spare parts and consumables

Qualification and Experience

• A Degree in Mechanical/Chemical/Petroleum Engineering or its equivalent with 13 years’ relevant experience in the energy sector.

Job Title: Precommissioning, Commissioning and Start-up Lead Reference Code: PCSL-04 Location: Any City, Nigeria Responsibilities / Requirements

• Review contractual documentation on commissioning
• Lead in Project planning and scheduling of commissioning activities.
• Supervise the preparation of pre-commissioning, commissioning, start-up and handing over procedures
• Review test run (performance test) procedures and operating manuals prepared by the Project Process Leaders.
• Assist in the procurement of services for commissioning activities
• Identify project requirements and constraints and participates in ROKM sessions relating to pre-commissioning, commissioning and start-up activities
• Supervise the preparation of the integrated pre-commissioning, commissioning, and start up and test run Schedule
• Support HSE Manager in HSE plan preparation for commissioning activities. Participate in HAZOP review meeting
• Define commissioning Systems and hand over priorities
• Define and review the commissioning spare parts and consumables

Qualification and Experience

• A Degree in Mechanical/Chemical/Petroleum Engineering or its equivalent with 13 years’ relevant experience in the energy sector

Job Title: Civil & Structural Superintendent Reference Code: CSS-3 Location: Any City, Nigeria Responsibilities / Requirements

• Ensure civil works package implementation
• Assist subcontractors or direct hires the interpretation of drawings as well as providing support in the resolution of technical problems.
• Verify and confirm drawings and materials availability for efficient execution of the works
• Ensure the fulfilment of project quality and contractual requirements.
• Ensure the supervision and monitoring of works performed directly or subcontracted
• Coordinate human and technical resources, indicating any needs or surplus.
• Plan and monitor vendors or any specialists’ activities at site
• Manage technical and administrative documentation of civil activities.

Qualification and Experience

• A degree in Civil Engineering or its equivalent with a minimum of 13 years’ relevant experience in the Energy sector.

Job Title: Automation Specialist Reference Code: AUT-4 Location: Any City, Nigeria Responsibilities / Requirements

• Prepare technical documentation for control Systems and Telecommunication material and services requisitions.
• Implement Controls of Safety and Telecommunication Systems
• Prepare Telecommunication systems functional specifications
• Prepare Telecommunication equipment data sheets
• Prepare Control and Safety Systems supply specifications
• Prepare Advanced Control, Dynamic Simulation and Operator Training Simulator functional and supply specifications
• Validate Vendor Control and Safety Systems functional design specifications and participate in detail configuration documents definition
• Validate Vendor Control Systems and Telecommunication BOQs
• Coordinate detail engineering activities and ensure proper installation drawings definition
• Participate in F.A.T. activities and Vendor workshop
• Participate in Site Acceptance Test, loop checks and functional checks
• Provide technical and engineering support to construction Team
• Perform site engineering activities during construction and commissioning phases

Qualification and Experience

• A Bachelor’s degree in Electrical/Electronic Engineering or its equivalent with 8 years relevant experience in the energy sector.

Job Title: Mechanical Works Superintendent Reference Code: MCHWKS-2 Location: Any City, Nigeria Responsibilities / Requirements

• Organize, coordinate and control the execution of Mechanical works, performed by subcontractors or direct labor, ensuring the management of the interfaces with all construction disciplines and engineering departments
• Manage multidisciplinary interfaces, preventing and resolving interferences and clashes
• Provide construction team and subcontractors with the guidelines for the execution of works and monitor the adequacy of manpower and equipment to execute construction activities.
• Ensure the achievement of established construction milestones, including mechanical completion objectives.

Qualification and Experience

• A degree in Mechanical Engineering or its equivalent with a minimum of 13 years’ relevant experience in the Energy Sector.

Job Title: Commissioning Operation Lead Reference Code: CMOPL-3 Location: Any City, Nigeria Responsibilities / Requirements

• Verify that pre-commissioning, commissioning and start up requirements are accounted for in engineering documents
• Prepare and keep up-to-date the pre-commissioning, commissioning, start up and test run execution plans (including the mobilization of personnel)
• Supervise the preparation of the pre-commissioning, commissioning, start up and handing over procedures
• Review test run (performance test) procedures and the operating manuals prepared by the Project Process Leaders
• Review and / or define the Licensors / Vendors schedule and assignment, concerning pre-commissioning, commissioning, start up and test run activities
• identify the project requirements and constraints and participates in ROKM ‘sessions relating to pre-commissioning, commissioning and start-up activities
• Supervise the preparation of integrated pre-commissioning, commissioning, start-up and test run Schedule.
• Participate in HAZOP review meeting where necessary
• Review Model for compliance with the pre-commissioning, commissioning.ad start up requirements for accessibility and operability
• Define commissioning Systems and hand over priorities.

Qualification and Experience

• A Degree in Engineering (Mechanical, Electrical/ Chemical Engineering) with 15 years’ experience. .

Job Title: Instrumentation Superintendent Reference Code: INST-2 Location: Any City, Nigeria Responsibilities / Requirements

• Ensure that completion activities relating to Instrumentation and Telecom works are carried out properly ensuring discipline workflow as well as interfacing with the project organization and clients -
• Coordinate Instrumentation activities to ensure cost effective performance
• Promote safe work practices and environmental protection, ensuring that safety standards are respected
• Ensure the fulfilment of the project quality and contractual requirements
• Setup time schedule adhering to the time frame allocated to the specific scope of work
• Supports in the resolution of technical problems encountered during the execution of Instrumentation works

Qualification and Experience

• A Bachelor's degree in Electrical/Electronic Engineering or its equivalent with 13 years’ relevant experience in the energy sector.

Job Title: Test Pack Coordinator Reference Code: TPC-04 Location: Any City, Nigeria Responsibilities / Requirements

• Prepare test packs execution schedule in accordance with construction and commissioning requirements
• Set up tools to control test packs flow to achieve progressive completion of piping system.
• Interfaces with the construction team (mechanical, welding, instrumentation) and with the engineering and quality site team
• Steer daily coordination meetings with subcontractors and internal site organization, in order to manage activities schedule and Provide reports on progress of work and statistical data
• Coordinate walkthroughs in order to finalize tet packs and reinstatements, producing quality certificates
• Manage the test packs flow with the Client
• Manage punch list close-out with internal organization and Client

Qualification and Experience

• A degree in Mechanical Engineering or its equivalent with a minimum of 13 years’ relevant experience in the energy sector..

Job Title: Hydrotest Superintendent Reference Code: HDTS-04 Location: Any City, Nigeria Responsibilities / Requirements

• Organise, coordinate and control the execution of the Hydrotest activities, ensuring the management of the interfaces with all construction disciplines and engineering department.
• Support personnel ensuring feasibility (availability of drawings and materials) of activities
• Hydrotest Technical Project documents interpretations.
• Hydrotest and Reinstatements- interpretation of gauging activities results, applicable pressurization! depressurization steps
• Supports prefabrication, fabrication and installation of piping, piping underground, steel structures and supports.
• Knowledge of welding and NDT techniques, procedures (e.g. WPS, PQR) and equipment

Qualification and Experience

• A degree in Mechanical/Chemical/Petroleum Engineering with at least 13 years’ experience and Knowledge of welding and NDT techniques, procedures (e.g. WPS, PQR) and equipment.

Job Title: Power Systems Engineer Reference Code: PSE-4 Location: Any City, Nigeria Responsibilities / Requirements

• Lead Power Engineering activities in accordance with Project requirements
• Ensure compliance with all Project interfaces and supervise in/out information flow
• Prepare technical annexes for engineering activities to be subcontract’ed
• Ensure Discipline workflow, interfaces, quality checks and approval of all Discipline Project documents, including those of vendors.
• Provide technical support for Project functions including Procurement and Construction
• Support the construction team in implementing engineering solutions at site
• Provides technical support to other Project positions and specialist in various discipline

Qualification and Experience

• A degree in Electrical/Power Engineering with at least 15 years’ experience in the energy sector.

Job Title: Control Systems Engineer Reference Code: CSYE-4 Location: Any City, Nigeria Responsibilities / Requirements

• Prepare detail engineering documentation (thermal data sheets for Shell and Tube Heat Exchangers and Air Coolers) in compliance with the process requirements and technical specifications
• Review Client technical documentation and requirements relating to thermal design for Shell and Tube Heat Exchanger and Air Coolers
• Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work
• Ensure technical support during plant construction, precommissioning and commissioning phases

Qualification and Experience

• A degree Electrical/Electronic/Automation Engineering with at least 10 years’ Experience.

Job Title: Onshore Construction Manager, Plants Reference Code: OCM-1 Location: Any City, Nigeria Responsibilities / Requirements

• Provide leadership for project construction activities, supervising multidisciplinary construction works according to contract requirements and project objectives,
• Ensure the implementation of HSE procedures for construction . and precommissioning of plants
• Give guidelines in the definition of strategies, such as subcontracting plans, logistic and constructibility studies.
• Participate in defining the overall project planning and scheduling for construction activities.
• Coordinating and.instructing construction team with corrective actions
• Analyze all information regarding the progress of the project, indicating the causes of deviations between planned and actual and propose solutions to construction challenges.
• Ensure the implementation of recovery plans, if needed, including the replanning of activities
• Ensure effective interdisciplinary coordination verifying adequacy and consistency of construction strategies.
• Coordinate the execution of multidisciplinary construction activities and manage activities assigned to subcontractors, providing the guidelines for the execution of the works and monitoring the adequacy of manpower and equipment to face construction activities
• Manage interface with engineering departments for drawings and materials availability
• Manage Mechanical Completion activity by System & Sub-System as identified by Commissioning Manager.

Qualification and Experience

• A degree in Engineering with a minimum of 15 years’ relevant experience in the energy sector.

Job Title: Package Engineer Reference Code: PER-03 Location: Any City, Nigeria Responsibilities / Requirements

• Review of technical documentations.
• Supports Lead in defining cost evaluation for packages
• Follow-up assigned equipment/package to be supplied.
• Define detail engineering activities (layouts, 3D, routings, supports, etc.)
• Support discipline Lead in the activity with Project functions including Procurement and Construction.
• Coordinate activity for as built drawings.

Qualification and Experience

• A degree in Engineering or its equivalent with a minimum of 7 years relevant experience in the Energy sector.

Job Title: Commissioning Training Engineer Reference Code: COTE-2 Location: Any City, Nigeria Responsibilities / Requirements

• Training plan execution, with the support of Commissioning manager and Lead
• Review the project technical documentation and deploying them for training purpose
• Interface with project Management Team on training of Commissioning team
• Prepare pre-commissioning, commissioning, start up and test run documents
• Participate in the review of the test run (performance test) procedures and operating manuals prepared by the Project Process Leaders.
• Train commissioning team on Hazop
• Prepare commissioning spare parts list and consumables list
• Review 3D Model for compliance with pre-commissioning, commissioning and start- up requirements
• Prepare commissioning System Dossiers for site execution

Qualification and Experience

• A Mechanical/Chemical/Petroleum Engineering Degree or its equivalent with 10 years’ relevant experience in the energy sector.

Job Title: Commissioning Manager Reference Code: COMM-1 Location: Any City, Nigeria Responsibilities / Requirements

• Ensure the management of commissioning and start up activities, coordinating vith all project disciplines as required
• Prepare and keep up-to-date pre-commissioning, commissioning, start up and test run execution plans, procedures and integrated schedule
• Define commissioning Systems and hand over priorities
• Issuance of work progress report for commissioning activities.
• Ensure the verification of the KPI during the entire Project lifecycle.
• Lead in project meetings and review meetings to ensure commissioning requirements have been duly complied with
• Review test run (performance test) procedures and operating manuals prepared by the project process leaders.
• Participate in all HAZOP activities and jointly lead such activities with the HSE Manager
• Define the Licensors / Vendors schedule and assignment, for precommissioning, commissioning, start up and test run activities
• Define and review commissioning tools, temporary equipment1 specialized sub- contracts, spare parts, first fills and consumables
• Ensure the management of commissioning and start up activities, coordinating V the activities carried out
• Ensure the mobilization of manpower and resources and allocate such resources to commissioning and completion teams
• Assist the Construction Manager in the phases of completion of construction and pre-commissioning.
• Coordinate the handover to Commissioning in accordance with the priorities
• Approve work permits in Commissioning Controlled Areas
• Organize, joint meetings HSE Manager on pre start up Safety reviews
• Organize and performs the contractual test runs

Qualification and Experience

• A degree in Mechanical/Chemical/Petroleum Engineering or its equivalent with l5years experience

Job Title: Project Control Manager Reference Code: PCMGR-2 Location: Any City, Nigeria Responsibilities / Requirements

• Maintain Project Control System together with risk analysis.
• Project Status assessment and reporting with reference to project baselines and Control
• Budget control and management and prompt revision where necessary.
• Management of variation orders and reporting to the project manager
• Responsible for issuing Project Control procedures project WBS, Risk and Opportunity Management Plan, Contract Master Schedule, internal Control Budget and Cash Flow
• Supervise and ensure coherence between the cost control and scheduling systems
• Responsible for Document Control System setup and coordinate the implementation of all information and application systems required.
• Address interface system requirements (eg. Administration, Procurement, Engineering, ICT) and ensure the implementation of risk management methodology

Qualification and Experience

• A degree in Engineering with a minimum of 15 years relevant experience in the energy sector. .

Job Title: Project Manager, Integration Reference Code: PMPI-2 Location: Any City, Nigeria Responsibilities / Requirements

• Ensure the implementation of HSE procedures for construction and precommissioning of plants
• Give guidelines for the definition V of construction strategies, such as subcontracting plans, logistic and constructibility studies, during the various stages of the project
• Review of contractual documents construction and interfacing with other project functions.
• Lead in defining the overall project planning and scheduling for construction activities, with the support and expertise of construction lead roles
• Ensure that the.activities are carried out within planned time and costs,
• Coordinating and instructing construction team accordingly intervening with corrective actions in case of deviations or difficulties
• Analyze all information regarding the ogress of the work, indicating th causes of deviations between the program and the work carried out and propose solutions and/or request instructions to overcome these problems
• Ensure the implementation of recovery plans, if needed, including the replanning of activities and the reassignment of the scope of work to the subcontractors.
• Ensure effective interdisciplinary coordination verifying adequacy and consistency of construction strategies.
• Coordinate the execution of multidisciplinary construction activities and manage activities assigned to subcontractors, providing the guidelines for the execution of the works and monitoring the adequacy of manpower and equipment to deliver on the activity
• Manage interface with engineering departments for drawings and materials availability

Qualification and Experience

• A degree in Engineering with 15 years’ relevant experience in the energy sector.

Job Title: Handling and Lifting Superintendent Reference Code: HLSP-03 Location: Any City, Nigeria Responsibilities / Requirements

• Organize, coordinate and control the execution of handling and lifting activities, performed in the project.
• Ensure the supervision and monitoring of the Handling and Lifting activities performed, subcontracted or handled by direct hires.
• Create and keep updated lifting and handling equipment register with all the necessary information: certification, maintenance, color coding, etc.
• Ensure that lifting activities are covered by lifting plans where applicable
• Promote safe work practices and environmental protection, ensuring that safety and quality standards are respected
• Define procedures for all forms of lifting and handling during the project

Qualification and Experience

• A degree in Mechanical Engineering or its equivalent with a minimum of 15 years relevant experience in the Energy Sector or Construction sector.

Job Title: Field Engineering Manager Reference Code: FEM-02 Location: Any City, Nigeria Responsibilities / Requirements

• Prepare Field Engineering Execution plan and define the necessary resources.
• Keep records of the changes and additions made to the Engineering documents as a result of construction and commissioning requirements until as built drawings are prepared
• Analyse feasibility of construction work, providing information on the actual on- site availability of documents and materials
• Coordinate Field activities and manage technical documents, feasibility technical analysis, non-conformities, review and approval of test packages
• Manage and supervise engineering activities at site/yard to support construction work and to proffer solutions to engineering problems arising from construction.

Qualification and Experience

• A Degree in Engineering (Mechanical, /Electrical) With 13 years experience of relevant experience

Job Title: Quality Control Manager Reference Code: QCM-02 Location: Any City, Nigeria Responsibilities / Requirements

• Supports the Project Quality Manager in defining the Project Quality Control System and in identifying needed project QC plans and QC procedures in accordance with the Company Quality Management System (QMS)
• Supports the Project Quality Manager in planning/allocating QC Supervisor functions to the various area of the project, ensuring relevant coordination onsite
• Supports the Project Manager/Project Quality Manager in relations with the
• Client/Authorities responsible for QC activities
• Supports the Project Quality Manager in the preparation of quality control specifications for construction works, coordinating and agreeing checks by
• Technical Departments and Client
• Reports Project QC information/data to Project Quality Manager by means of Corporate methodologies/tools

Qualification and Experience

• A degree in Engineering with 13 years’ relevant experience in Project Quality Control Management.
• Prospective candidate must possess relevant certifications

Job Title: Electrical Superintendent Reference Code: ELST-02 Location: Any City, Nigeria Responsibilities / Requirements

• Promote safe works practices and environmental protection, ensure that safety standards are respected in carrying out electrical works.
• Arrange for the cost-effective performance of electrical construction works
• Ensure proper discipline workflow, interfacing with the project organization
• Support the resolution of technical problems encountered during the execution of the works
• Ensure the supervision and monitoring of works performed directly or through a subcontractor
• Monitoring of Electrical vendors/specialists activities at site

Qualification and Experience

• A Bachelor's degree in Electrical/Power Engineering or its equivalent with at least 13 years’ relevant experience in the energy sector.

Job Title: Welding Superintendent Reference Code: WSPD-03 Location: Any City, Nigeria Responsibilities / Requirements

• Ensure the fulfilment of project welding requirements (Fabrications band Welding Specifications, WPS, Welding Books, Project procedures, etc.)
• Coordinate and organize welding activities to ensure cost-effective performance, in accordance with the established operating programs.
• Coordinating and control the activities performed by the dependent teams of Supervisors, Foremen, Welders, and Welding Operators.
• Ensure that welding teams (Supervisors, Welders, and Welding Operators) are properly trained and certified for the execution of project before their employment in production and during the life cycle of the project.
• Ensure proper discipline workflow while interfacing with the project (office/site/yard) organization and clients.
• Ensure th supervision and monitoring of Welding Activities performed. Coordinate human and technical resources.
• Plan and monitor vendors or any specialists activities at site

Qualification and Experience

• A degree in Fabrication/Mechanical /Welding Engineering a minimum of 15 years relevant experience in the Energy sector.
• Prospective candidate must hold SCWI/CSWIP 3.2

Job Title: System Completion Co-ordinator Reference Code: SYSTC-04 Location: Any City, Nigeria Responsibilities / Requirements

• Coordinate plant systems completion
• Coordinating all construction disciplines according to established timeframe and priorities and interfacing with engineering and commissioning departments
• Set-up of tools to control progressive completion of construction and precommissioning activities
• Guide and monitor field activities according to commissioning priorities
• Plan walkthroughs with Client and disciplines, in accordance with systems completion priorities and define the required actions needed to completed mechanical works.
• Steer coordination meetings and provide leadership for system completion team
• Ensure the preparation of certificates dossiers required to achieve mechanical completion, in accordance with contractual provisions

Qualification and Experience

• A Mechanical Engineering Degree or its equivalent with 15 years relevant experience.

Job Title: Assembly & Erection Superintendent Reference Code: AEST-03 Location: Any City, Nigeria Responsibilities / Requirements

• Coordinate interfaces with erection and installation activities Supervise the execution of prefabrication workshop activities involving usage of machineries/tools
• Supervise the execution of prefabrication workshop fit-up and welding activities, checking non-destructive controls are carried out and released before painting
• Provide quantitative data for producing weekly progress reports, monitoring employed manpower
• Verify and confirm the availability of drawings, materials and equipment to plan the efficient execution of the works performed
• Supervise preparation and execution of Mechanical Completion processes.

Qualification and Experience

• A Mechanical Engineering Degree or its equivalent with 13 years relevant experience.

Job Title: Management Systems & Quantity Coordinator Reference Code: MGSYTC-3 Location: Any City, Nigeria Responsibilities / Requirements

• Coordinate activities for the implementation of Mechanical Information Systems ensuring Project data consistency from activities such - Spooling, Welding and Material Traceability Systems.
• Ensure the management of project quantities both for accounting purposes and progress measurement ensuring accuracy of data in compliance with standards, procedures and project requirements
• Verify the implementation and use of the project management information systems fr project -
• Analyze and upload data into project management system (all data received from technical departments)

Qualification and Experience

• A Mechanical Engineering Degree or its equivalent with 12 years relevant experience.

Job Title: Piping Superintendent Reference Code: PIST-03 Location: Any City, Nigeria Responsibilities / Requirements

• Ensure proper discipline workflow while interfacing with the project organization
• Provides technical support for problems encountered during the execution piping works
• Ensure the fulfilment of the project quality and contractual requirements
• Ensure a cost-effective performance of piping construction works.
• Control production parameters in terms of efficiency and productivity
• Manage technical and administrative documentation of piping works

Qualification and Experience

• A Mechanical Engineering Degree or its equivalent with 13 years relevant experience.

Job Title: Static Equipment Engineer Reference Code: 04 Location: Any City, Nigeria Responsibilities / Requirements

• Ensure Static Equipment suppliers follow-up.
• Ensure technical support during plant construction, pre-commissioning and commissioning phases.
• Participate in technical evaluation of bids.
• Prepare technical documentation for equipment procurement.
• Perform technical bid analysis under the responsibility of the Static Equipment Specialist Lead.
• Perform the estimation of item (weight/cost).

Qualification and Experience

• A degree in Mechanical Engineering or its equivalent with a minimum of 10 years relevant experience in the Energy sector

Job Title: Heavy Equipment Mechanic Reference Code: HEM-5 Location: Any City, Nigeria Responsibilities / Requirements

• Manage equipment assigned to workshop by ensuring continuous service through routine/non-routine maintenance and/or repair maintenance and/or repairs relying on OEM manuals and latest process and maintenance guideline
• Stock the required quantity of materials in order to ensure continuity of work and ordering spare parts for scheduled maintenance in good time
• Supervise and co-ordinate work of mechanics in order to ensure that work is carried out in compliance with quality requirements and established time schedules
• Ensure compliance with safety procedures

Qualification and Experience

• A Diploma or its equivalent with a minimum of 13 years’ relevant experience on heavy duty equipment repairs and maintenance.
• Prospective candidate must be able to read and interpret OEM instructions and specifications.

Job Title: Fabrication Welding Coordinator Reference Code: FWC-02 Location: Any City, Nigeria Responsibilities / Requirements

• Manage execution and welding of structural prefabrication, piping prefabrication, piping supports prefabrication, appurtenances prefabrication, and elementary assembly as per project construction methods.
• Coordinate workshop support activities (lifting and handling)
• Ensure that welding activities and non-destructive controls are carried out as planned
• Ensure proper discipline workflow, interfacing with project (home office and/or site/yard) organization and client
• Interface with Asset department for workshop equipment maintenance and repairs

Qualification and Experience

• A degree or its equivalent in Fabrication/Mechanical /Welding Engineering.
• A minimum of 15 years experience in the Energy sector. AWS/CSWIP certification is an added advantage.

Job Title: Material Technology Lead Reference Code: MTL-3 Location: Any City, Nigeria Responsibilities / Requirements

• Verify the consistency of the welding, material selection, NDT, coating, cathodic protection and corrosion engineering documents for the project
• Provides technical support to project in materials and testing management (welding, non-destructive testing, material, coating1 field joint coating, corrosion, insulation and cathodic protection)
• Specifies technology developments that can potentially impact project performance and proffers solutions based on new technologies.
• Interface with various disciplines in areas relating to materials technology to maximize project performance

Qualification and Experience A degree in Metallurgical/Materials/Mechanical Engineering or its equivalent with a minimum of 15 years’ relevant experience in the Energy Sector. Prospective candidate should be an AWS/NACE 3 holder Job Title: Power Systems Lead Reference Code: 4 Location: Any City, Nigeria Responsibilities / Requirements

• Lead Power Engineering activities in accordance with Project requirements
• Ensure compliance with all Project interfaces and supervise in/out information flow
• Prepare technical annexes for engineering activities to be subcontract’ed
• Ensure Discipline workflow, interfaces, quality checks and approval of all Discipline Project documents, including those of vendors.
• Provide technical support for Project functions including Procurement and Construction
• Support the construction team in implementing engineering solutions at site
• Provides technical support to other Project positions and specialist in various discipline

Qualification and Experience

• A degree in Electrical/Power Engineering with at least 15 years’ experience in the energy sector

How to Apply Interested and qualified candidates should send their Resume to: [email protected] using the Job Title and Reference Code as email subject (e.g. Job Title - Reference Code) Application Deadline: 9th May, 2017.

---